Polishing machine equipment introduction:

1. An automatic nipple in front of the cloth wheel can change the size and shape according to the workpiece.

2. The workpiece can be automatically pushed forward to contact the throwing wheel and can swing left and right.

3. Attached with automatic spray gun and storage wax barrel

4.PLC control spray wax and cloth wheel loss feed

In order to better ensure the normal operation of the equipment, it can effectively ensure smooth production and meet product requirements.

Polishing machine equipment for effective maintenance.

Prepare a reasonable polishing machine operation guide to ensure the production plan and the quality requirements of the polishing machine product are achieved.

First check whether the electrical switch is in the 0 position, then turn on the power supply, check whether the mechanical parts are normal. If there is any abnormality, check and eliminate it in time.

Polishing personnel should first adjust the machine, test a team, whether it is qualified, and determine the qualified before normal production. Inspect the quality of the tube at work, whether it is not clean enough, whether there is any scratch, whether the polished tube will be deformed, etc. Once it is found, stop it immediately. Don't go through the same field and throw it away. It should be checked with the quality inspector and the work should be done well.