Most mechanical equipment emits some noise more or less during the operation of the polishing machine, but if the noise is too large, it will interfere with people's normal work and even damage people's hearing. Therefore, once a certain mechanical equipment is found to be too noisy, the polishing machine equipment should be disposed of in time to avoid serious consequences. Generally speaking, the noise generated by the automatic polishing machine cannot be completely eliminated, and can only be reduced. How to reduce the noise pollution of the automatic polishing machine? The answer will be given below:

For a simple example, the power lines on the motherboard of the three-box power supply are all interrupted. At this time, you need to find some professional electricians to carry out the repair. After the whole equipment is not used for a period of time, the surface of the polishing machine design will pile up. The series of dust, in this case, the bearing of the equipment may have some non-rotation, so in actual use, more or less will emit some noise.

How to determine the noise of the automatic polishing machine, you need to touch the hand constantly, the price of the polishing machine If you feel that the automatic polishing machine is very noisy, or feel hot, this time the motor has been damaged, and when the automatic polishing machine When the noise is emitted during the work, it is much larger than before, and the entire polishing disc will be slightly vibrated. In this case, the bearing will be damaged, so when the turntable does not move, the automatic polisher is sure. There will be noise, and this time you need to use the dial indicator to make adjustments.