Before you maintain the automatic polishing machine, be sure to read the manual carefully. The polishing machine manufacturer is familiar with the use of each part and the matters needing attention:

(1) The polishing machine cleaning operation on the machine bin must be guaranteed at least once a week to avoid clogging.

(2) Regularly clean and maintain the skateboard and the middle knife and the front top knife. The general maintenance period is about one month.

(3) Lubricating oil is an important part of the maintenance work of the automatic polishing machine. Generally, all the bearings need to be re-added once after about 3 months.

(4) The parts that need long-term maintenance of the polishing machine include the oil in the gearbox of the reducer, which is usually added once every 1-2 years.

(6) Whenever refueling is required, it is necessary to grasp the amount. When the material of the polishing machine is added, it should not be excessive, so as to avoid machine failure due to the oil immersion of the switch.

In daily use, care should be taken to keep the machine dry, not to allow the machine to come into contact with water, and not to rinse directly with water.