Every automatic polishing machine needs to be transported. What problems should we pay attention to when polishing equipment? Let's talk about you in the following small series;

1. For the transportation of the electric box panel, one or two foam boards on the front panel of the panel are required, mainly because the fragile parts of the whole equipment of the electric box panel are used, and the polishing machine is damaged in order to prevent collision during loading and transportation. Therefore, it is necessary to use a foam board.

Second, the level of the equipment workbench will directly affect the quality of the polishing machine of the equipment, but many manufacturers put all the parts on the workbench in order to make it cheaper during transportation. The polishing machine design then shakes and turns during transportation. It will inevitably affect the accuracy of the workbench, and it will also cause cracks and damage.

Third, the polishing machine parts for the event need to be fixed. For example, the mechanical arm, automatic waxing device and other moving parts need to be fixed by rope before loading.

Fourth, the gap between the equipment and the equipment and the need to fix it, mainly to avoid collisions caused by collisions during transportation.