If you want the polishing products of the polishing machine to be good, then you need to take protective measures and avoid accidents. At the polishing site, you should not have the convenience of entering the room. You need to start the ventilation before opening the work and the window needs to be opened. Quality needs to ensure that the air in the working environment is circulated. When polishing, the staff needs to wear protective equipment correctly. They need to wear thermal protective clothing, dust masks, poison masks, and fire-retardant gloves.

You can't smoke, laugh, or make trouble in the workplace. You need to use a disinfectant to wash your hands or take a shower after work contact. The polishing machine design also requires compliance with the procedures for heat treatment safety technology operation. It is also necessary to carry out inspections as required on time.

It should also be noted that the equipment cannot be polished on wooden floors and the slope of the ground should not exceed two percent. The device must not be littered during use and should not be worn out. It is also necessary to check the wiring of the wires and the fact that the wires are not bent. Regular cleaning and maintenance of the equipment is required.

1.check the wiring of the polishing machine regularly. If there is damage, repair and replace it immediately.

2. regular inspection of the polishing machine parts, if the screws are loose, immediately reinforce, to avoid loose screws, causing the polishing machine to shake when in use.

3. check the gears and bearings regularly, and find that there is not enough lubricant inside the bearing. Add lubricant to the bearing.

4. After the work is completed, the inside of the equipment should be cleaned.