1. Sulfuric acid cleaning method: the concentration of concentrated sulfuric acid is guaranteed to be 98%. The polishing sheet is cleaned in high temperature sulfuric acid. The temperature needs to be controlled at 70-100 ° C. Then the polishing sheet is raised, and the polishing machine manufacturer then goes at normal temperature. Wash and wait until the wash is done using ionized water.

2. the lye cleaning method: the use of alkali drying, can achieve the desired cleaning and polishing machine.

3.ultrasonic cleaning: the principle of using ultrasonic, so that the cleaning of the polishing sheet can be completed.

4. the simple and rude method directly dry the purpose of cleaning.

5.the use of halogen light to achieve the purpose of detection, the polishing film placed under the halogen lamp for detection can achieve the purpose of irradiation cleaning.

6. first of all, it is necessary to comprehensively analyze the soil pressure resistance, water level, etc. at the installation site. The design of the polishing machine must meet the installation and use requirements of the polishing machine to determine the installation plan.

7. When the polishing machine is installed, try to clean the ground so that the machine is not installed and it is not easy to clean.

8. Installation should avoid high-voltage transmission lines and avoid interference with the electronic polishing machine.

9. need to have independent power supply, polishing machine style to avoid sharing with other high-power appliances.

10.polishing machine installation requires a relatively spacious installation site, it is important to have enough operating space.

11. Rainy, humid, and the installation of polishing machine in areas such as saline and alkali can not be placed on ordinary mud. Otherwise, many problems such as ventilation and drainage should be considered.

12. Install the polishing machine and do not install it on the tuyere. Otherwise, the polishing machine will not work well when it is windy.